Cisco easy vpn client software
To access Cisco Feature Navigator, go to m/go/cfn.
With this feature, SAs can be established at connection using the vlan subnet address or mask as a source proxy.
Ip subnet-zero ip domain-lookup ip dhcp excluded-address!
12.4(11)T The following feature was added in this release: Identical Addressing Support.4(20)T The following features were added in this release: cTCP Support on Easy VPN Clients The following commands were introduced or modified for this feature: crypto ctcp, ctcp port Glossary AAA -authentication, authorization.Note Most routers that run the Cisco Easy VPN Client software have a default route configured.Step 4 connect auto manual Example: Device (config-crypto-ezvpn connect auto Connects the VPN tunnel.Remote security servers, such as radius and tacacs, authorize users for specific rights by associating attribute-value (AV) pairs, which define those rights, with the appropriate user.Step 2 show ip nat statistics Example: Device# show ip nat statistics Total active translations: 0 (0 static, 0 dynamic; 0 extended) Outside interfaces: cable-modem0 Inside stellar phoenix entourage recovery keygen interfaces: Ethernet0 Hits: 1489 Misses: 1 Expired translations: 1 Dynamic mappings: - Inside Source access-list 198 pool enterprise refcount.
Cisco 3640-Cisco IOS Release.2(8)T or later release.
In the Cisco Easy VPN Remote feature, the router automatically restores the previous NAT configuration when the IPsec VPN tunnel is torn down.
Version.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption service internal!Easy VPN also adds a route to the VPN concentrator so that IPsec-encapsulated packets get routed to the corporate network.The recommended Xauth timeout is 50 seconds or fewer.The local traffic feature will be automatically disabled if all Easy VPN tunnels in Connect ACL mode are active and when no Easy VPN client is configured in Connect ACL mode.Specify the configuration name to be assigned to the interface.The following commands, which are also present in the non-Xauth configurations, are also required for Xauth use: aaa authorization network easy vpn remote-groupname local-Requires authorization for all network-related service requests for users in the group named "easy vpn remote-groupname" using the local username database.Step 4 crypto ipsec client ezvpn name Example: Device (config crypto ipsec client ezvpn ezvpn1 Creates a Cisco Easy VPN remote configuration and enters the Cisco Easy VPN remote configuration mode.
Line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login Save Password Configuration Example The following sample show running-config output shows that the Save Password feature has been configured (note the password encryption aes command and username keywords in the output.